• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle Replacement

Door handles appear to be something minor, but if you dislike the way they look or are finding them difficult to use, it's worth replacing them. With some patience, you can put in a new handle in no time.

Modern door handles are usually equipped with cover plates which hide the screws, giving them an attractive appearance. However, you'll need to attach them separately if your new handle does not have them attached already.

Remove the Old Handle

The door handle isn't only a decoration for your home it also serves as an element of security that allows you to lock and unlock the door. As time passes, the door handle may start to lose its grip or feel loose. It could be beginning to appear old and worn. This is a good indication that it's time to replace the door handle.

If your door handle is becoming difficult to use, it may be time to replace it. This is a serious issue since you won't be in a position to lock or unlock the door which could put you and your family at risk.

Another reason to replace your door handle is if it's damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly when your children or elderly family members struggle to open it and end up trapped within. Luckily, it's quite easy to fix a broken door handle by replacing the old one.

Modern door handles are usually standard sizes and should be able to fit any door. If you're unsure if the new door handle you're buying will fit, try removing the old one and determining the holes in its housing. This will allow you to purchase the right size door handle.

It is easiest to remove the old door handle by removing it from the door. This is usually done with the screw driver. However, some door handles have an outer cover plate that hides the screws that mount them, so you'll need to remove this cover plate to get access to the screws beneath. Once you have removed the old handle, make note of the way the spindle is positioned so that you can align it when you fit the new one.

You can also remove the door handle by depressing the latch mechanism. You can use a screwdriver for removing the door handle. However, you'll need to locate the small latch, which is located on the edge of the trim piece. After you have removed the latch, take off the handle and the strike plate. Then, you can remove the latch from the door's edge.

The Strike Plate

You'll have to replace your latch plate when replacing the handle. It's the plate that holds the hole where the door's latch hooks in when the door closes. The package the new handles are packaged in will include two different latch plates - a rectangular one and a circular one (see the above diagram that outlines door handle parts). If you have a rectangular latch plate, swap it with a circular one. This will let the latch hook onto the strike plate and make the handle easier.

The first step is to take off the screw holding the old latch plate. The screws are often quite tight and require a fair amount of force to loosen them. It might be beneficial to have a second person assist in this area if it is possible.

After the screws are removed the latch should pull out of the door easily. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This may help free the plate.

Now you can prepare the new strike plate to be installed. Screw the latch plate into the doorjamb using the wood screws that were included with the new handles. Be careful not to tighten too much the screws, as this could damage the strike plate.

If you're not sure if the latch plate is in the correct position, try closing and then opening the door to see whether it latches and closes correctly. If it doesn't you'll have to adjust the strikeplate either up or down, forward or back until the door shuts correctly.

If the door continues to move or jiggles, you may need to increase the size of your latch hole on the strike plate. This is more common for older doors, but can happen due to wear and tear, hinge mortises that are too narrow or not the right size for the latch, or from damaged or broken strike plate that is damaged or broken. If this is the case, follow the exact procedure for adjusting the strike plate, using a metal file instead of the hammer and chisel.

Eliminating the Latch

The latch is a curved metal piece that slides in and out of a hole in the inside of your double glazed door handle repair. The latch is moved forward when you turn the handle. It also hooks into an opening in the frame of the door handles Repair near me to keep your door closed. If your door is wiggles when you close it, changing the latch may be all you need to fix it.

It's difficult to see the screws that hold the latch to the door, but there's usually a small hole on the trim plate that allows you to insert a screwdriver into the slot and take it off. After removing the trim plate, you should be able to remove the latch as well as the bolts that hold it, as well as the spindle in position.

If the latch won't come out you can try using a paper clip or a tool to free it from the handle mechanism. Place the item into the recessed slot of the latch, and gently twist it or jiggle until the that the latch and handle begin to separate. You may need repeat this process a few times before you are able to take the latch off.

It should be possible to slide the new latch into its slot without problems after you have removed the old one. Use the new screws to connect the latch to the strike plate or door frame. Make sure it's properly positioned in the slot and aligned with the screw chambers.

Take note of the backset (the distance between the center of the large hole on the front of the door and the edge) prior to installing the new handle. Check that the latch size of the new handle is equal to the measurement.

You'll require a brand new cylinder for your lock if replacing the handle and latch or if your current one is damaged. If you're not changing the locks, the new latch will fit into your existing recess, and be compatible with your current keys. Select a latch with rectangular cover plates that match your existing handles.

Take off the cover plate

You can replace your old door handles with a new rose and lever designs to make a difference in the appearance of your home. You can buy complete sets of door handles that come with the appropriate escutcheons and privacy adjustor kits.

To replace the double glazed door handle repair handle inside remove the cover plate (or rose), which covers the screws and inner mechanism. Find an opening tab on the plate, and make use of a flathead screwdriver to lift it off the knob. It could have a slot on one edge or be held by pins.

After the cover plate is off, remove the screw that holds the interior handle in place, and then set it aside. Remove the screws that hold both the inner and outer plates. You can loosen them with the help of a Philips Screwdriver. Then, you can remove the outer plates and latch plate from the door and put them aside.

Most doors have a gap between the door jamb and the inside edge of the frame that allows for a handle, but not all do. If yours doesn't, you'll need to drill a hole into the door to accommodate the new handle. The procedure for this is similar to the procedure opening a double glazed door handle repair using the lock, however you'll have to be extra careful not to damage the door or frame.

After drilling the holes then you'll need to install new screws for the door knob. Buy the same dimensions as your old screws to ensure that you don't get a handle that is too loose or tight. Installing a new latch and strike rod is also necessary. These are not included in the majority of door handle sets.

If you're in search of a reliable replacement for your interior door handle set, try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's factory-fitted and has been praised with hundreds of five-star reviews. It's an excellent choice for replacing worn or damaged door handle hardware in the interior of your Chevy HHR.