• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Allowing your cat to move around the house at will is a great way to keep your pet physically active and mentally stimulated. A flap can help reduce accidents with toilets by making it easier for your cat to leave the house if necessary.

Measure the Door

A cat flap lets your pet to go and come at their own pace, without opening the door for them. This makes it ideal to keep them in the house the home when you're away, and helps keep unwanted pests out of your home too!

It is important to measure the door to ensure that you have the right size cat flap. There are many sizes available. This ensures you get the correct size to fit into your upvc door, otherwise, it could be too small or large, and your cat may struggle to use it.

Use a ruler to determine the width at several locations along the edge of the door. You should also take measurements of the door's height in a few spots. A door that is too tall can cause your cat to perform an exercise routine every time it wants to use the flap.

Ask a glazier for assistance in case you're not sure how to measure the door. They can determine whether your door is suitable for cat flaps and advise you on what size flap to purchase.

When you've got your measurements, the next step to do is to mark out the shape of the hole in the door. This will provide you with an outline to cutting the hole out and will prevent you from making mistakes that could cost you money in the future!

Make sure you make holes in the right position. For instance, if installing the cat flap inside the patio door, it is important that the hole doesn't sit too close to hinges, as this could cause leakage and problems with the seal.

If you have an opening made of glass it is best to leave this task to a professional glazier. It isn't easy to install a cat-flap in an existing pane. You might also discover that it breaks and loses its weatherproof seal.

Measure the Cat

A cat flap lets your pet move around as they want, without having to leave him home alone. It also helps stop the draughts from entering your house, which aren't good for you or your cat!

If you own a uPVC door or composite door, it could be difficult to install the cat flap. These kinds of doors are often made from different materials than standard wooden or uPVC doors and the process of installing them is different, too. Make sure you check with the manufacturer if the door is compatible before you install an uPVC cat flap on your uPVC composite or upvc door panels cat flap door. Modifications can cause warranty issues.

In general, these kinds of doors are built to be tough and durable with insulation included. They are more resistant to the weather than other kinds of door, but it isn't easy to install a cat flap glass door installation near me flap. Consult a professional before installing a cat flap onto the uPVC door or composite.

You'll need to take the height of your child to ensure they fit through the door. It is easiest to measure their height when they are calm or asleep, so that they don't sway around. Once you've determined their height, take a measurement of the distance between their stomachs and the floor to determine where the bottom of the cat flap needs to go. Then, you can mark this spot on the door.

If your uPVC or composite door is made of metal (either aluminium or steel) you'll need to be very careful when cutting it with power tools. Cutting into metal can cause it crack, especially when the area is composed of toughened glass. It is highly recommended to employ a glass installer when installing the cat flap inside a pane. This will stop the glass from breaking or becoming hard. A glazier can also supply you with a circular hole to use for the flap for your cat. This will be less likely to break and is more secure for your cat to use.

Cut the Hole

If it does not, you can make one yourself by using a piece of paper (tracing paper is the best choice). If it doesn't, you can make one yourself using a sheet of thin paper (tracing paper is ideal). After the shape has already been penciled on the door, you can use your spirit level to make sure that it is horizontal. This will ensure that your cat flap is properly positioned in the opening and will not slide open or close.

Then, make use of a jigsaw to cut out the shape marked on the door. Use a blade designed for uPVC doors. It is usually labeled with this information. If not you can ask the staff at the DIY store for assistance. After the hole has been cut then place the flap against it and open it to ensure that the flap moves easily. If it becomes stuck on any point, then you can use a file or fitting a cat flap in a upvc door sandpaper to fix it.

It is also important to ensure that there are no electric gas or cable lines within the door you will be cutting through because they could be damaged by the jigsaw. Be aware of any handles or other fittings on the door that must be removed to accommodate the cat flap. Be careful not to cause damage to these items during the process.

Most people who fit the cat flap themselves have an ordinary solid uPVC door and so will not be dealing with any of these issues. If your door is constructed of wood or has a decorative part that is not easily removed, it will make the job.

It is always advisable to seek professional assistance from a cat flap fitter for these kind of jobs as it is important to get the job done correctly to avoid potential problems in the future. If you do it wrong, it could cause the door to be damaged and could invalidate the warranty.

Fit the Flap

After you've made your hole drilled, put the flap on to check whether it can be opened easily. If you find any points that stick or catch, file them down with the aid of a hand file or sandpaper until it fits properly and opens without any problems. Make sure that the flap sits perfectly flush with the door.

If your kit doesn't have a template, you can make use of thin paper such as tracing or Acetate. Place the paper on the door, and draw a line in order to indicate where the flap should be placed (this will serve as a cutting guide). Then using the pencil lines you've drawn on the door, mark four screw holes in the corners of the flap. These will be the screws that you'll use to secure it into the correct position.

The majority of uPVC door are solid and easy to cut. If your door is constructed of GRP or composite, it can be more difficult. If you are not familiar with this, it is recommended that you hire a professional. They will also be able tell you if your door is suitable for the installation of an animal flap.

If you are planning to install a cat flap in composite doors, it is important to first consult with the manufacturer or a professional joiner. Any alterations made to the doors could invalidate the warranty. If you decide to tackle the work yourself, bear in mind that it could be a messy job and may even be hazardous.

With composite doors, you'll generally require the aid of a saw or grinder to cut through the door's frame rather than just through the GRP. This is a potentially dangerous job, and you will have to be extra careful to not damage the door. It's important to remember that cutting a hole into any type of door glass is much more difficult than making the same change in the case of a uPVC or solid wood door.