• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The external door handles and locks handles in your home are an important part of the decor. A new handle will bring your home's decor and interior modern.

Over time, your door knobs may become stiff, or even break. These are indications that it's time to replace the knobs. This guide will help you pick the correct door handle replacement for your home.

Door Knobs

Door handles enhance the look of your home, while making it easier for people to open and close doors. They come in a variety of finishes, colors and styles to complement your decor. If yours is beginning to show signs of wear or requires an upgrade You can change them in just a few easy steps.

You need to locate the shaft, or spindle through which the knob is attached to the door. Some knobs have a tiny hole that you can put an incredibly small screwdriver to remove the set screws holding the handle in place. Others have a thin slot or hole that you can use a flathead screwdriver to push on a spring-activated pin, also known as a detent. The pin opens the latch mechanism, and lets you to pull or push the knob.

After you have gained access to the shaft or spindle, take the knob off of the door and replace it with the new one. Make sure to align it properly and test to see that the latch is working properly before tightening your new set screws.

Once you've replaced the knob, put the rod for latching over the door's hole and lock it in place with the rod mechanism on the second knob. Make sure the holes are aligned, then thread in the latch plate screws and tighten them.

Some people opt for the smooth or brushed finish for their door hardware for an elegant, modern look that matches other furnishings in their homes. Some prefer a rustic design that works well with farmhouse-style rooms. If you have members of your household who have mobility issues You might be interested in a rim lock or lever knobs for doors that require less pressure to operate.

Other factors are being considered more and more for the design of door handles. Accessibility and infection control are key considerations in the development of new designs for handles. For example some handles and hinges can be operated using a person's arm.

Latch

The latch that holds the door handle open can wear down over time. It is simple to replace the latch on your door handle. This will result in huge differences in how it opens and closes.

Depending on what type of handle you use the latch can be a separate part or a component of the knob. In either case, you will follow the same procedure to remove and replace. It's simple to take off the old latch, particularly when you have a door handle with a "magic" button. The tiny pressure-slot, which is located on the side knob, is the one you'll need to press in order to pull the latch out of the handle.

If your handle isn't equipped with this magical button, the first step is to remove any cover plates that sit over the latch plate. These are usually circular or rectangular and can be removed using the aid of a screwdriver. Some have slots where you can insert your screwdriver. Other handles simply snap off.

Then, unscrew the machine screws that secure the plate's inner and latch to the door handle. These are the screws that are shorter with a sharp tip and you'll have to store them in a secure location to use them again in the next steps. After the screws are removed, you are able to remove the latch plate and mechanism from the hole, and then set it aside.

Now you can start on the new latch. Insert the latch plate into the door hole and secure it with the hardware supplied. Make sure that the square pin on interior of the latch faces the latching mechanism in the brompton carry handle and aligns with the screw holes on the other sides of the handle. Then, push the exterior latch plate on and secure it with the screws supplied.

Strike Plate

It is common to replace a double glazing door handles handle if it feels loose, or does not lock properly. This is usually caused by incorrectly aligned parts of the latching system, such as the strike plate being too short or has moved upwards or down on the doorjamb with time. This simple fix allows you to replace your existing strike plate with a longer, new one that will provide better security and will keep your sliding door handles (published on chessdatabase.science) shut.

Apply a lipstick or another marking material on the latch bolt to determine if it's the strike plate. Close the door and try to latch it. If the mark is below your strike plate hole, it indicates that the plate is too small and the door will not latch. If the mark is above the strike hole on the plate, it's likely that the strike plate has been moved up or down on the doorjamb.

Depending on the door You may be able to attach the new strike plate into the existing one, using the screws that come with it. But, you may have to drill holes first, and then chisel some of the wood to ensure it's a good fit. If this is the case, you must be careful not to chisel too much or you may cause damage to the integrity of your doorjamb.

Installing a brand new box-style strike plate will give the lock a more secure grip on doors and will require more force to open them. It typically requires two longer screws to fix the strike plate into the frame of the door. To do this, you'll need to take off the existing strike plate, then drill and chisel out the wood to make space for the new one.

This rare strike plate is made of solid brass and comes with a heavy-duty thickness. It's specifically designed to be used with antique rim locks. This kit includes wood screws as well as machine screws, allowing you to pick the right hardware to suit your needs. Keep in mind that wood screws have a pointed tip whereas machine screws are blunter.