• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come at their own pace, without you having to let him in or out. They can also help keep your cat from having to go to the bathroom in the house.

Installing a cat flap into the door panel made of upvc is much easier than in a glass door, however it does require some skills and the right tools.

Take a look at the Door

Installing a cat door into the front door is difficult, but so long as the cat flap fitters flap is of the appropriate one and you follow the directions, it shouldn't be too difficult. We will show you how to draw the shape, use an jigsaw for cutting out the door's area and then finish the job by securing the cat flap to the door. This will ensure the flap stays in position and shields the doors from the damage caused by rain and wind.

To determine the size of the cat flap you require, measure the width of your pet. This will ensure that the flap is big enough to allow your pet to go inside and out of the house without having to open or close the door each time, but it is also small enough to stop them from going too far in either direction.

If your kit has a drawing showing where to drill, you can stick it on the door and then draw around it. If your door has moulding or a sill at the bottom, be sure that you leave enough space between your cat and the moulding or sill.

Set a square to ensure that you're cutting correctly and ensure that the hole is a good rectangle shape. Once you are satisfied with this, you can begin to remove the rest of the door material. If you own a square that you have cut, use it to check whether you're cutting in the right way and to ensure that the hole is a proper rectangle shape, once you are happy with this you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great method to let your pet in and out without having to worry about them coming in with visitors or leaving unwelcome gifts in the house. It also prevents drafts and helps to keep the temperature in your home steady. However, installing the cat flap to your door can seem like an intimidating task for those who've never done it before, leading many people to call a professional joiner or carpenter to do the job. While this is certainly an option, it's possible to complete the task yourself if you own the right tools and follow the instructions with care.

While this is much simpler when using a timber door it is still feasible in uPVC doors - although you must be cautious not to damage the doors as this will end the warranty. The first step is to examine the door's measurements to make sure it will accommodate the new cat-flap. If you have an ordinary uPVC panel, this should be easy. However, if your door is composite or another type of door, you might need to be more careful.

The next step is to determine the height of your cat's stomach. This is the height from the floor to the underside of the cat's stomach and you'll need to find a spot near the door where this measurement is within the range that your cat can comfortably pass through. Once you've figured out the measurements you'll be required to mark the space using a spirit level and a pencil so you are sure that the opening will fit your cat.

Once you've marked the area, it's time to cut the hole. It is essential to be patient and use a jigsaw to ensure that the cuts are clean and smooth, not rough and uneven. This could damage your door. It is also important to wear safety glasses and a dust-proof mask when using the jigsaw, since inhaling the sawdust could be harmful to your health. Once you have completed the cutting, you will have to smooth the edges of the hole using sandpaper so that your cat flap can be fitted easily in place.

Cut a Hole

Getting a cat flap fitted into an existing door panel or double glazing cat flap glazing sealed unit can be quite difficult. If you are not very proficient in DIY, it's best to hire a professional to complete the work for you. A shoddy job might not just be ugly, but it could also be an issue for security and also allow cold air to enter when the cat is outside, and hot air to escape once inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure it is positioned correctly and runs flush with the rest of the door. Make sure you have a piece of sandpaper at ready to smooth out any rough edges.

After the line is drawn, you can cut the hole with a jigsaw. Be sure to wear the appropriate safety gear for working with a power tool. If you are worried about the sound produced by a jigsaw you can buy a cordless version which is much quieter and easier to use.

You should only remove the material required to make the cat flap. It is essential to leave a bit of material for the wall thickness of the cat flap. However cutting off too much material can cause issues or even damage to the frame of the door.

A door made of upvc may include a metal frame, or panel within it that could interfere with the microchip cat flap and if this is the case, you'll need to make an oversize hole so that the metal doesn't touch the the cat flap, if this is done it is essential to fill in the oversize gap and render it watertight.

If you are fitting an animal flap to an upvc door or a double glazed window with a metal frame then you'll need to talk to a professional who will supply you with a new pane of glass that already has the hole for the cat flap double glazing flap premade inside. It is much less expensive to have this done instead of trying to install a cat flap into an existing glass pane that was not designed specifically for the purpose.

Fit the Flap

Cat flaps let your pet leave and come as they please, giving them the ability to unwind in the home whenever they're feeling like it. However, if you have a uPVC door it can be difficult to install an animal flap, especially when you don't have glass panes that can be cut to accommodate one. If you're willing to install a half-glazed uPVC replacement panel, it's possible to install a cat flap. It's not a matter of drilling an opening in the door. You'll also need to perform a few steps to ensure it's secure.

A composite door panel usually has an extremely thin plastic outer skin joined to a soft polystyrene core that is insulating. It is essential to be careful when cutting the material. This type of door typically comes with a template drawing that you can use as a guide to cut the hole into the door.

After you've marked the location of the hole in your door, now it's time to put in the cat flap. You can choose from a range of models, ranging from simple push-button units to ones that are microchip-activated and allow your pet in. However, regardless of what type of cat flap you select, it's crucial to ensure that your cat is able to use the flap and not get trapped outside in bad weather.

A circular fitting cat flap in Upvc door panel (https://humanlove.stream/) is more effective than a square, because circles can be cut more securely into the glass. This is because square holes can make the glass more susceptible to cracking when a drill is used on it. It's also a much safer option as you're not at risk of having to drill into toughened glass that could shatter and injure your pet or family members. This is especially crucial if you have elderly or children living in your home who might be injured by glass fragments.