• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. However If windows with double panes are anchored by internal beading it will be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

If you're planning attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also an excellent idea to lay down a drop cloth before you begin working on the glass, so that any shards will fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

upvc window repairs near me windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your upvc window repairs near me window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could help fix a window that is sliding. To do this, you'll need open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you are happy with the fit of your window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's important to replace the seal as soon as you can to ensure that your upvc window repairs windows are waterproof and draught-proof.

uPVC handles may also loosen. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle wears out. It's relatively easy to repair a loose uPVC handle. The first step is to close the window repairs and perform a test fit. The corners of the sash should be aligned with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if wake up every morning to find mouldy walls and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also hinder your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on how severe the issue is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Like any mechanical part hinges will be damaged over time. It is an easy process but it can be easier when you have a person to help hold the frame up.

Make sure that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us a photo via our website will often resolve the problem. We are always happy to provide advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window repairs operate and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become unbalanced due to wear, creating a gap where the sash meets frame. If they're beyond repair, it may be required to realign them. Second, the interlock can also become unbalanced. This is located on the hinge side and may need to be cleaned. In some instances it is possible to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to prevent draughts. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them rather than repair them. If you have any problems with your Upvc window it is recommended to speak with an expert as soon as possible.